Nortel 2000 Software Reference Manual page 242

Chapter 3 Using the CLI Commands
Remote Annex Administrator's Guide for UNIX
Book C-224
Table C-73. Default Key Mappings for tn3270 (continued)
IBM 3270 ASCII Key Sequence
Key Name
DP ESC d or ESC [ d or ESC O d
FM ESC f or ESC [ f or ESC O f
FERASE CTRL-u
SYNCH CTRL-r
TREQ CTRL-a
XOFF CTRL-s
XON CTRL-q
tn3270 Command Mode
Table C-74 shows the commands you can issue in tn3270 command
mode. Enter this mode in one of two ways: 1) by entering the escape
character while you are connected to a host, or 2) by issuing the CLI
tn3270 command with no arguments. When you enter the escape
character, the current host session is suspended.
The tn3270 commands are a subset of the telnet commands (see
Table C-70 on page A-210).
Book C
Description
Duplication character
Field mark character
Field erase
Synch with user
Test request
Suspend output to
screen
Resume output to
screen