Book C
authoritative_agent
This Annex parameter enables the Annex to send an ICMP Address Mask
reply to a host that broadcasts a subnet mask request. A Y enables this
parameter, an N disables it. The default is Y.
authorized_groups
This asynchronous port parameter specifies the LAT protocol remote
group codes that are accessible to users on a given Annex port. You can
enter all, none, a series of numbers between 0 and 255 separated by
commas (e.g., 1, 5,7) or a range of numbers between 0 and 255 separated
by dashes (e.g., 1–5,200–255) followed by enabled or disabled. The
default is all disabled.
autobaud
This asynchronous port parameter determines whether or not the Annex
automatically detects line speed when a connection is opened and whether
or not it sets matching terminal port characteristics on the next login. This
parameter works only when the Annex is configured as a VMS interface
(i.e., when the cli_interface parameter is set to vci)
information, see the Annex Interface for VMS Environments
Administrator's Guide. A Y enables this parameter, an N disables it. The
default is N.
To disable the autobaud feature, enter a value in the speed parameter
before setting autobaud to N.
Remote Annex Administrator's Guide for UNIX
Chapter 2
Configuration Parameters
For more
.
Book C-47