Nortel 2000 Software Reference Manual page 152

Chapter 3 Using the CLI Commands
Remote Annex Administrator's Guide for UNIX
Book C-134
• Any command issued without arguments, except reset, responds
with an error or usage message; the commands do not prompt
for missing arguments.
• The show command displays the annex, port, or printer
parameter values for the local Remote Annex. If there are more
than 24 lines of information to display, a more prompt appears
after the 24th line. Pressing q for quit returns to the admin
prompt; the attention character terminates the admin session;
and any other key continues the display.
The na commands that admin does not support are:
• annex
• boot, dumpboot
• copy
• echo
• passwd
• read, write
The na utility is stored on and accessed from a UNIX host.
Book C