Table C-98. Cli Commands - Nortel 2000 Software Reference Manual

Book C
Command
arap
backward
bg
connect
fg
forward
hangup
help or ?
hosts
ipx
ipxroute
jobs
kill
lock
netstat
ppp

Table C-98. CLI Commands

Arguments
[switch] string, none
[–d] [%] [%, +, –, number, hostname]
service [hostname [port]]
[–q] [%] [%, +, –, number, hostname]
[switch] string, none
[command]
[–qn] [host]
add {default |network} gateway hops ticks
replace {default |network} gateway hops ticks
delete {default | network} gateway
[%] [%, +, –, number, hostname]
[time-out]
[–AaCfgimnpQRrSstxz]
Remote Annex Administrator's Guide for UNIX
Chapter 5 Software Reference Guide
Description
Converts a CLI line into an ARA
connection. When the port is reset, it
reverts to its original mode.
Reopens the next lower numbered
session already established at your
port, from within the current session
without returning to local mode.
Puts a job into the background.
Uses the LAT protocol to connect to
an advertised LAT service.
Brings a job to the foreground.
Reopens the next available higher
numbered session already
established at your port.
Disconnects all jobs and resets all
CLI connections.
Displays help information on CLI
commands.
Displays the names and addresses of
hosts and other Annexes listed in the
Annex's host table.
Converts a CLI port to an ipx mode
port.
Sets up routing information for IPX
links.
Displays a list of current jobs.
Terminates a job.
Locks a port.
Displays network statistics.
Converts a CLI port to a PPP port.
Book C-321