Nortel 2000 Software Reference Manual page 215

Book C
Table C-65. Setting Parameters Using stty (continued)
Parameter Description
broadcast Enables the terminal to display Remote Annex
–broadcast administrative messages. Setting the parameter –broadcast
prevents any display of administrative messages. The
default is broadcast.
cera Sets the character-erase character. The default is Delete
character (
CTRL-?
climask7 Masks CLI input to seven bits. When climask7 is disabled,
8-bit ASCII input is expected.
crt Sets the following defaults for video terminals: crtcera,
crtlera, tabs, echo, –newlin, –ilower, and –olower.
crtcera Controls how both the character erase (cera) and the word
–crtcera erase (wera) are echoed. Setting crtcera echoes the erase
characters in an appropriate way for a video terminal; the
previous character (or word) appears as if it has been
erased. The default is crtcera. Setting –crtcera echoes the
erase characters in a way appropriate for a hard-copy
terminal. The first erase character is echoed as a \ followed
by the deleted character. Each additional use of the erase
character deletes and displays another character. The first
character typed (other than the erase character) echoes a /
and the character; typing asdf<Delete Delete>
asdf\fd/g.
crtlera Controls how the line erase (lera) is echoed. Setting crtlera
–crtlera erases all characters on the line and moves the cursor back
to the beginning of the line. Setting –crtlera echoes the line
erase character in a way that is suitable for hard-copy
terminals. It echoes the erase character and a new line, so
that the deleted line is still visible but the print head is
positioned at the beginning of the next line. The default is
crtlera.
(continued on next page)
Remote Annex Administrator's Guide for UNIX
Chapter 3
).
Using the CLI Commands
echoes as
g
Book C-197