Nortel 2000 Software Reference Manual page 276

Chapter 5 Software Reference Guide
Remote Annex Administrator's Guide for UNIX
Book C-258
Parameter Values
ipx_dump_path 0–100 chars.
ipx_dump_ 0–48 chars.
username
ipx_file_server 0–48 chars.
ipx_frame_type ethernetII,
raw802_3,
802_2,
802_2snap
ipx_security Y or N
ixany_flow_ Y or N
control
keep_alive_ 10–255
timer
Default Description
No default Specifies the full
pathname that
stores the uploaded
Annex dump image
on the Novell file
server.
No default Provides a user
name for logging on
to the Novell file
server before the
Annex sends a dump
file to the server.
No default Contains the name
of the Novell file
server from which
the Annex boots.
raw Defines the framing
802_3 used for IPX packets
on the Ethernet
interface.
N Controls whether or
not IPX security is
enabled on the port.
N Treats any input
character as a start
(XON) character if
output has been
suspended by a stop
(XOFF) character.
20 seconds The time interval, in
seconds, between
the transmission of
identification
packets during
times of network
inactivity.
Book C