Book C
Table C-81. All Parameters
Parameter
Values
a_router
hexadecimal
ethernet address
acp_key
<unset> or
a string
address_origin
local, acp, dhcp
alarmsyslog
Y or N
allow_broadcast
Y or N
allow_
Y or N
compression
Remote Annex Administrator's Guide for UNIX
Chapter 5
Software Reference Guide
Default
Description
00-00-00-0
The ethernet
0-00-00
address of the
network A_Router.
<unset>
Specifies a string
for the Annex's
encryption key;
used for passing
messages between
the Annex and the
ACP security server.
local
Determines where a
Remote Annex will
look to find the
local and remote IP
addresses to use as
the endpoints of a
PPP/IPCP link. This
parameter works
only when the mode
parameter is set to
"slip" or "ppp".
Y
Enables or disables
the T1 alarm event
syslogs.
Y
Permits the port to
receive Annex
administrative
broadcasts.
N
The Annex uses
TCP/IP header
compression if the
SLIP/PPP link's end
point also uses
compression.
Book C-249