Nortel 2000 Software Reference Manual page 279

Book C
Parameter Values
long_break Y or N
loose_source_ Y or N
route
map map_val
modem_number
map_to_lower Y or N
map_to_upper Y or N
(serial port)
map_to_upper Y or N
(parallel port)
Remote Annex Administrator's Guide for UNIX
Chapter 5 Software Reference Guide
Default Description
Y When enabled, the
Annex returns the
user to the CLI
prompt after
receiving a break
greater than two
seconds.
Y Allows the Internet
protocol to use
loose source routing.
Unset Controls the
mapping of the
modem, T1 Drop/
Insert interface, and
T1 Network
Interface.
N Enables/disables
case conversion
(from upper to
lower) for
characters sent from
the terminal to the
Annex.
N Enables/disables
case conversion
(from lower to
upper) for
characters sent from
the terminal to the
Annex.
N Enables/disables
case conversion for
parallel printers that
do not support
lower case
characters.
Book C-261