8
Brake line
Repairing brake line
⇒ page 199
Flaring tool - Summary of components
Work instruction
⇒ page 201
8.1
Repairing brake lines
Using the brake line flaring tool - VAS 6056- , the brake lines can
be crimped with a pipe outside diameter of 5 mm, without dam‐
aging the coating. So that in certain cases parts of the brake lines
can be replaced cheaply.
Note
Brake lines must only be bent max. 90°, otherwise they kink
♦
or present deformations, which constrain the line cross-sec‐
tion in an unauthorized manner.
Preferably separate brake lines at underbody.
♦
The positions of the intermediate pieces must be selected so
♦
that they cannot chafe on moving parts.
Do not grease spindle and only clean with methylated spirits.
♦
Special tools and workshop equipment required
♦ Brake line flaring tool - VAS 6056-
♦ Brake filling and bleeding device , e. g. -VAS 5234-
List of individual tools:
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
⇒ page 201
Octavia II 2004 ➤ , Octavia II 2010 ➤
Brake systems - Edition 11.2017
199
8. Brake line