Repairing Brake Caliper Fn3 - Skoda Octavia II 2004 Workshop Manual

– Insert inner sealing lip of the protective cap with disassembly
wedge - 3409- in the groove of the cylinder.
To do so hold the piston in front of the brake caliper.
– Press the piston with the piston jig - T 10145- -1- into the brake
caliper.
The outer sealing lip of the protective cap will clip into the piston
groove.
1.3

Repairing brake caliper FN3

♦ Brake inspection ⇒ page 8
♦ Install the complete repair set when undertaklng repairs.
♦ Use only methylated spirits for cleaning the brake.
♦ Thinly coat brake cylinder, piston and gasket ring with lithium
grease - G 052 150 A2- .
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
.
Octavia II 2004 ➤ , Octavia II 2010 ➤
Brake systems - Edition 11.2017
1. Repairing front brake caliper
155