Skoda Octavia II 2004 Workshop Manual page 134

Octavia II 2004 ➤ , Octavia II 2010 ➤
Brake systems - Edition 11.2017
– Make sure that the brake pads are located in the pad retaining
plates -arrows-.
– Secure the brake caliper using new self-locking screws.
♦ There are four self-locking screws in the repair set, which must
be fitted.
– Attach the wheels.
Note
Observe the instructions for changing the pad
♦
After each brake pad replacement, forcefully apply the brake
♦
pedal repeatedly to ensure the brake pads go into their normal
operating position.
Check brake fluid level after changing brake pads.
♦
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
128
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
⇒ page 111