Skoda Octavia II 2004 Workshop Manual page 140

Octavia II 2004 ➤ , Octavia II 2010 ➤
Brake systems - Edition 11.2017
For the version with the spring bushing
– Slacken the spring bushing -1- for the hand-brake cable from
the bracket on the brake caliper.
Continued for all versions
– Press the lever at brake caliper -2- in the
-direction of the arrow- and unhook the hand-brake cable -3-.
– Unscrew screw for hand brake cable from trailing arm.
– Unhook hand-brake cable from the bracket and pull out of the
guide tube.
Installing:
– Push the hand-brake cable into the guide tube and attach it to
the bracket.
– Press the lever at brake caliper -2- in the direction of the arrow
and hook on the hand-brake cable -3-.
For the version with the spring clip
– Press the spring clip -1- onto the hand-brake cable.
Continued for all versions
The hand-brake cable must be fitted free of stress between the
brake caliper support and the retaining clip.
– Screw the retaining clip to the trailing arm.
– Hook the hand-brake cable -2- into the compensating clamp
-3-.
– Tension the hand-brake cable with the adjusting nut -1-.
– Adjust handbrake ⇒ page 132
134
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
.