Octavia II 2004 ➤ , Octavia II 2010 ➤
Brake systems - Edition 11.2017
– Screw the brake caliper with both guide bolts to the brake car‐
rier.
– Insert both caps.
– Insert retaining spring in brake caliper.
– Mount the plug connection of the brake pad wear indicator.
– Attach the wheels.
Note
Observe the instructions for changing the pad
♦
After each brake pad replacement, forcefully apply the brake
♦
pedal repeatedly to ensure the brake pads go into their normal
operating position.
Check brake fluid level after changing brake pads.
♦
106
⇒ page 94
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�