Skoda Octavia II 2004 Workshop Manual page 142

Octavia II 2004 ➤ , Octavia II 2010 ➤
Brake systems - Edition 11.2017
1 - Bearing bracket
❑ Removing and installing
⇒ page 138
❑ up to 05/2007
❑ Assignment ⇒ Electron‐
ic Catalogue of Original
parts
2 - Self-locking nut, 25 Nm
3 - The brake light switch - F-
and brake pedal switch - F47-
Note
Mounted on vehicles until 10.05.
From 11/05, the brake light switch -
F- and the brake pedal switch - F47-
are mounted onto the master brake
cylinder ⇒ page 139
❑ before assembling the
brake light switch, clip
the brake pedal to the
pressure rod of the
brake servo unit
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
⇒ page 137
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
❑ Grease tappet head
with polycarbamide
grease - G 052 142 A2- .
❑ Setting the brake light
switch ⇒ page 138
4 - Bearing bracket
❑ Removing and installing
⇒ page 138
❑ as of 06/2007
❑ Assignment ⇒ Electron‐
ic Catalogue of Original
parts
5 - Self-locking nut, 25 Nm
6 - Brake pedal
7 - Cap
8 - Bearing shell
9 - Support
❑ for ball head of pressure rod of brake servo unit
10 - Screw
11 - Bushing
12 - Bearing shaft
13 - Screw, 20 Nm
❑ Assignment ⇒ Electronic Catalogue of Original parts
14 - Crash bar
❑ as of 06/2007
❑ Assignment ⇒ Electronic Catalogue of Original parts
136