5
Summary of Components: brake ser‐
vo unit/master brake cylinder
Summary of components - left-hand drive
Summary of components - right-hand drive
Fitting position of the cap from the brake fluid reservoir
⇒ page 177
Vacuum pump for brake servo unit (vehicles with diesel engines)
⇒ page 178
Brake vacuum pump - V192- (vehicles with petrol engines)
⇒ page 178
Checking the non-return valve
Checking vacuum system
Removing and installing the pressure sensor for the brake servo
unit -G294-
⇒ page 185
5.1
Summary of components - left-hand drive
Note
The master brake cylinder and the brake servo unit can be replaced independently of one another.
⇒ page 173
⇒ page 176
⇒ page 181
⇒ page 181
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
5. Summary of Components: brake servo unit/master brake cylinder
Octavia II 2004 ➤ , Octavia II 2010 ➤
Brake systems - Edition 11.2017
173