Skoda Octavia II 2004 Workshop Manual page 175

– Connect the thread plug -1- of the brake filling and bleeding
device e.g. -VAS 5234- to the brake fluid reservoir.
– Switch on the brake filling and bleeding device e.g. -VAS 5234-
and activate the system with a brake fluid pressure of 0.2 MPa
⇒ Operating instruction of the brake filling and bleeding de‐
vice .
– Set the pressure e.g. by turning the regulating valve -2-.
– Provide a suitable catch pan for used brake fluid.
– Remove the dust caps of the bleeder valves at the brake cal‐
ipers.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
Octavia II 2004 ➤ , Octavia II 2010 ➤
Brake systems - Edition 11.2017
4. Bleeding brake system
169