Skoda Octavia II 2004 Workshop Manual page 199

Octavia II 2004 ➤ , Octavia II 2010 ➤
Brake systems - Edition 11.2017
– Unscrew nuts -1- from brake servo unit.
– Carefully remove the brake servo unit from the vehicle.
Installing:
– Installation is carried out in the reverse order.
Note
If the battery earth strap is disconnected and connected, carry out
certain additional operations ⇒ Electrical System; Rep. gr. 27 .
After installing, it is necessary to:
– Bleed brake system ⇒ page 168 .
– Bleed clutch ⇒ Gearbox; Rep. gr. 30 .
Vehicles up to 11/2005
– Setting the brake light switch ⇒ page 138 .
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
193
7. Brake servo