Skoda Octavia II 2004 Workshop Manual page 154

Octavia II 2004 ➤ , Octavia II 2010 ➤
Brake systems - Edition 11.2017
– Unscrew screws -1- from the right bracket.
– Unscrew nut -2- from the left bracket.
– Remove bracket.
Installing
– Insert bracket.
– Screw on nut -2- for the left bracket and tighten to tightening
torque.
– Screw in screw -1- for the right bracket and tighten to tighten‐
ing torque.
– Screw in screws -1- for the brake servo unit -2- and tighten to
tightening torque.
– Further installation occurs in reverse order.
Specified torques:
Brake servo unit to bracket/front wall
♦ Use new screws!
Mounting bracket on bulkhead
♦ Use new nut or screw!
148
25 Nm
25 Nm
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�