Skoda Octavia II 2004 Workshop Manual page 163

– Insert wooden plate so that the piston is not damaged.
– Lever off protective cap with disassembly wedge - 3409- from
the brake caliper.
– Remove gasket ring with disassembly wedge - 3409- .
Note
When removing, make sure that the cylinder surface is not dam‐
aged.
Installing:
– Clean piston and gasket ring with white spirits and dry off.
– Before inserting the piston and gasket ring, thinly coat with
lithium grease - G 052 150 A2- .
– Insert sealing ring into the brake caliper.
– Position the protective cap -A- on the assembly tool -
T10146/6- -1-.
Octavia II 2004 ➤ , Octavia II 2010 ➤
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
Brake systems - Edition 11.2017
1. Repairing front brake caliper
157