Skoda Octavia II 2004 Workshop Manual page 52

Octavia II 2004 ➤ , Octavia II 2010 ➤
Brake systems - Edition 11.2017
The control unit is bolted to the hydraulic unit and is located on
the right of the engine compartment.
WARNING
The brake lines around the hydraulic unit must not be bent!
– Read out and note the actual control unit coding ⇒ Vehicle
diagnostic tester.
– Remove battery ⇒ Electrical System; Rep. gr. 27 .
– Remove engine cover.
1.9 ltr. diesel engine:
– Remove connecting hose to inlet connection ⇒ Engine; Rep.
gr. 21 .
– Remove intake manifold flap motor - V157- ⇒ Engine; Rep.
gr. 23 (except vehicles with engine identification characters
BJB).
2.0 ltr. diesel engine:
– Remove bulkhead plenum chamber ⇒ Body Work; Rep. gr.
66 .
– Remove connection pipe between intake hose and exhaust
turbocharger.
– Remove top toothed belt guard.
Diesel engines with the diesel particle filter:
– Remove pre-exhaust pipe with diesel particle filter ⇒ diesel
engine; Rep. gr. 26 .
46
Rep. gr.45 - Anti-lock brake system
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�