– Screw the brake caliper with both guide bolts to the brake car‐
rier.
•
The bolt of the brake caliper must be located behind the guide
of the brake carrier!
– Insert both caps.
– Bolt brake hose to brake caliper.
– Remove brake pedal load , e.g. -V.A.G 1869/2- .
– Mount the plug connection of the brake pad wear indicator.
– Bleed brake system
– Attach the wheels.
Note
Observe the instructions for changing the pad
♦
Firmly depress brake pedal several times with vehicle station‐
♦
ary so that the brake pads are properly seated in their normal
operating position.
Check brake fluid level.
♦
⇒ page 168
.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
Octavia II 2004 ➤ , Octavia II 2010 ➤
Brake systems - Edition 11.2017
⇒ page 94
101