Octavia II 2004 ➤ , Octavia II 2010 ➤
Brake systems - Edition 11.2017
– First, position the brake caliper with the brake pads at the bot‐
tom -arrow- of the brake carrier.
– Screw the brake caliper with both guide bolts to the brake car‐
rier.
•
The bolt of the brake caliper must be located behind the guide
of the brake carrier!
– Insert both caps.
– Mount the plug connection of the brake pad wear indicator.
– Attach the wheels.
Note
Observe the instructions for changing the pad
♦
After each brake pad replacement, forcefully apply the brake
♦
pedal repeatedly to ensure the brake pads go into their normal
operating position.
Check brake fluid level after changing brake pads.
♦
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
98
Rep. gr.46 - Brakes - mechanism
⇒ page 94