4
Brake pedal - left-hand drive
Summary of components of brake pedal
Separating the brake pedal from the brake servo unit and clipping
onto the brake servo unit
Removing and installing brake pedal
Removing and installing bracket
Setting, removing and installing the brake light switch - F- and
brake pedal switch - F47- to 10/05
Removing and installing brake light switch -F- and brake pedal
switch -F47- as of 11.05
4.1
Summary of components of brake pedal
WARNING
The brake pedal travel must not be restricted by additional floor
coverings.
Grease all bearing surfaces with polycarbamide grease - G 052
142 A2- before assembly.
⇒ page 135
⇒ page 137
⇒ page 137
⇒ page 138
⇒ page 138
⇒ page 139
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
Octavia II 2004 ➤ , Octavia II 2010 ➤
Brake systems - Edition 11.2017
4. Brake pedal - left-hand drive
135