FABIA 2000
Body Work
55-3
Fuel-tank lid unit
Summary of components of the fuel-tank lid unit
1 - Fuel-tank lid unit
comprises the fuel-tank cap
and rubber part
Removing:
–
Unscrew the fuel-tank cap.
–
Activate the remote release
to draw back the release rod.
Release screw ⇒ item 2.
–
–
Remove the rubber part from
the fuel-tank filler tube and
swivel out the fuel-tank lid
unit from the side section.
Installing:
–
Fit the fuel-tank lid unit (rub-
ber part folded back) hinge
side first.
–
Screw down the fuel-tank lid
unit and mounting part
⇒ item 3.
–
Screw down the fuel-tank
cap.
Note
For emergency opening pull the
Bowden wire ⇒ item 6.
2 - 1.5 Nm
3 - Mounting part
is inserted in the side section
⇒ item 8
Removing:
–
Removing the fuel-tank lid
unit ⇒ item 1.
–
Pull out the mounting part.
Installing:
The installation occurs in reverse order.
4 - Drain hose
5 - Seal
6 - Bowden wire
7 - Fuel-tank filler tube
8 - Side section
Edition 11.99
S00.5319.01.20
Fuel-tank lid unit
55
1
55-3
1
page