Repairing The Clutch Release Mechanism - Skoda Fabia II 2007 Workshop Manual

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02T - Edition 05.2014
2 Repairing the clutch release mecha‐
nism
Special tools and workshop equipment required
♦ Grease - G 000 100-
1 - Clutch release bearing
❑ Do not wash the bear‐
ing, just wipe clean
❑ replace noisy bearings
⇒ Electronic Catalogue
of Original Parts
❑ removing and installing
⇒ page 67
❑ remove and install to‐
gether with the clutch re‐
lease lever -Pos. 3- and
guide bushing -Pos. 5-
⇒ page 67
❑ grease contact points
on the clutch release
lever with grease - G
000 100-
2 - 5 Nm + 90° further
❑ always replace ⇒ Elec‐
tronic Catalogue of
Original Parts
3 - Clutch release lever
❑ remove and install to‐
gether with the clutch re‐
lease lever -Pos. 1- and
guide bushing -Pos. 5-
⇒ page 67
❑ Original grease must be
removed from the con‐
tact surface of the clutch
release lever
❑ Grease contact surface
on the ball stud with
grease - G 000 100-
4 - Retaining spring
❑ attach to clutch release lever
5 - Guide bushing for clutch release bearing
❑ removing and installing
❑ remove and install together with the clutch release lever -Pos. 3- and clutch release bearing -Pos. 1-
⇒ page 67
❑ Grease guide bushing in the area of the release lever with grease - G 000 100-
6 - Gasket ring for drive shaft
❑ replace ⇒ page 126
7 - Ball stud, 20 Nm
❑ Original grease must be removed from the contact surface of the clutch release lever
❑ grease with grease - G 000 100-
66
⇒ page 67