Agilent PXT Wireless Communications Test Set
Getting Started Guide
General Capabilities of the Agilent E6621A PXT
• Frequency Division Duplex (FDD) and Time Division Duplex (TDD) options
• Real-time 3GPP LTE downlink (DL) signal modulation and uplink (UL) demodulation
• eNodeB simulation with L1, L2 and L3 protocol stack
• Settable eNodeB, UE, and network operation parameters
• Settable frequency, power and modulation schemes
• SISO and MIMO testing capabilities
• Connection to Agilent 89600 VSA software for greater in-depth signal analysis
• VoLTE end-to-end functional voice testing capability
• LTE to LTE Handovers with two PXTs
• LTE to 2G/3G Handovers with PXT and 8960
• Support for Single Radio Voice Call Continuity (SRVCC) with PXT and 8960
General Specifications
Environmental
Operating Temperature:
Location
Rack Mount
Table Top
Storage Temperature: -20° C to +70° C
Altitude: 2000 meters (maximum)
Humidity: Maximum relative humidity is 80% for temperatures up to 31
relative humidity at 40
This product is designed for indoor use, only.
Physical Specifications
Weight: 27.6 Kg max (depending on product option)
Dimensions: 222 H x 444 W x 600 D mm nominal
Power Requirements
Input Voltage Range: 100 to 240 VAC, automatic selection
Input Frequency Range: 50/60Hz
Input Current Rating: 5A @ 240 VAC (maximum)
Mains supply voltage fluctuates up to +/- 10% of the nominal voltage.
Transient over-voltages are typically present on the mains supply.
Maximum Ambient Temperature
35° C
45°C
C
o
7A @ 100 VAC (maximum)
2
C decreasing linearly to 50%
o