Table of Contents
Advertisement
U3042AE08
General Specifications
Specifications for the test set are characteristic for the system performance of the analyzer
and test set. Actual performance of the system is based on the customers analyzer and
options that are used with the test set. A functional certificate is only offered for the
U3042AE08.
NOTE
Power Requirements
Verify that the required ac power is available before installing the test set to the analyzer.
• 100/120/220/240 VAC (50/60Hz)
• The instruments can operate with mains supply voltage fluctuations up to ± 10% of
the nominal voltage.
• Air conditioning equipment (or other motor–operated equipment) should not be placed
on the same ac line that powers the test set and analyzer.
•
Table 1
determine the electrical and cooling requirements.
Table 1
Instrument
N5242A
N5230C
U3042AE04
WARNING
User's Guide U3042-90002
This Manual:http://www.manuallib.com/agilent/u3042ae08-test-set-user-guide.html
When connected to a network analyzer, this test set will degrade the
performance at the test ports. The internal switch paths reduce test port
power and power to the receivers. This affects the test port power of the
analyzer and also reduces dynamic range. The reflection tracking values
measured in the
"Operational Check" on page 45
analyzers dynamic range to determine the approximate performance of the
system.
contains the maximum wattage for all instruments. This table can be use to
Power Requirements
Standard Equipment
Maximum
Wattage
450
350
350
This is a Safety Class I product (provided with a protective earthing
ground incorporated in the power cord). The mains plug shall be
inserted only into a socket outlet provided with a protective earth
contact. Any interruption of the protective conductor, inside or
outside the instrument, is likely to make the instrument dangerous.
Intentional interruption is prohibited.
General Specifications
can be subtracted from the
5
Advertisement
Table of Contents
