Smc20 Sensor Module For Determining The Actual Motor Speed And The Path Length (Option K48); Description - Siemens SINAMICS S150 Operating Instructions Manual

Electrical installation
4.9 Other connections
4.9.17 SMC20 Sensor Module for determining the actual motor speed and the path length
(option K48)
4.9.17.1

Description

Description
The SMC20 Sensor Module is used for determining the actual motor speed and the path
length. The signals emitted by the rotary pulse encoder are converted here and made
available closed-loop controller via the DRIVE-CLiQ interface for evaluation purposes.
The following encoders can be connected to the SMC20 Sensor Module:
● Incremental encoder sin/cos 1Vpp
● Absolute value encoder for EnDat and SSI (with 5 V operating voltage)
Figure 4-17
96
SMC20 Sensor Module
Drive converter cabinet units
Operating Instructions, 07/07, A5E00288214A