Bico Technology: Interconnecting Signals - Siemens SINAMICS S150 Operating Instructions Manual

Operation
6.3 Basic information about the drive system
Parameters
• p0120
• p0130
• p0139[0...2]
• p0140
• p0170
• p0180
• p0186
• p0187[0...n]
• p0188[0...n]
• p0189[0...n]
• p0809
• p0810
• p0811
• p0812
• p0813
• p0819[0...2]
• p0820
• p0821
• p0822
• p0823
• p0824
6.3.4

BICO technology: Interconnecting signals

Description
Every drive contains a large number of interconnectable input and output variables and
internal control variables.
BICO technology ( Binector Connector Technology) allows the drive to be adapted to a wide
variety of conditions.
Digital and analog signals, which can be connected freely by means of BICO parameters,
are identified by the prefix BI, BO, CI or CO in their parameter name. These parameters are
identified accordingly in the parameter list or in the function diagrams.
Note
The STARTER parameterization and commissioning tool is recommended when using BICO
technology.
182
Power Module data sets (PDS) number
Motor data sets (MDS) number
Copy motor data set (MDS)
Encoder data sets (EDS) number
Command data set (CDS) number
Drive data set (DDS) number
Assigned motor data set (MDS)
Encoder 1 encoder data set number
Encoder 2 encoder data set number
Encoder 3 encoder data set number
Copy command data set CDS
BI: Command data set selection CDS bit 0
BI: Command data set selection CDS bit 1
BI: Command data set selection CDS bit 2
BI: Command data set selection CDS bit 3
Copy drive data set DDS
BI: Drive data set selection, bit 0
BI: Drive data set selection, bit 1
BI: Drive data set selection, bit 2
BI: Drive data set selection, bit 3
BI: Drive data set selection, bit 4
Drive converter cabinet units
Operating Instructions, 07/07, A5E00288214A