Siemens SINAMICS S150 Operating Instructions Manual page 156
Converter cabinet units 75 kw to 1200 kw
Hide thumbs
Also See for SINAMICS S150:
- Engineering manual (530 pages) ,
- Manual (312 pages) ,
- Function manual (108 pages)
Table of Contents
Advertisement
Commissioning
5.3 Procedure for commissioning via STARTER
Figure 5-34
Note
The bus addresses on CU320 and on the PC must not be set the same.
5. The connecting cable from CU320 to AOP30 must be disconnected on CU320. A null
modem cable must be used here to connect the PC (COM interface) and CU320.
This interface must not be switched.
156
Setting the bus address
Drive converter cabinet units
Operating Instructions, 07/07, A5E00288214A
Advertisement
Table of Contents
