Siemens SINAMICS S150 Operating Instructions Manual page 185

Example 1: interconnecting digital signals
Suppose you want to operate a drive via terminals DI 0 and DI 1 on the Control Unit using
jog 1 and jog 2.
Figure 6-7
Example 2: connection of OC/OFF3 to several drives
The OFF3 signal is to be connected to two drives via terminal DI 2 on the Control Unit.
Each drive has a binector input 1. OFF3 and 2. OFF3. The two signals are processed via an
AND gate to STW1.2 (OFF3).
Figure 6-8
BICO interconnections to other drives
The following parameters are available for BICO interconnections to other drives:
• r9490
• r9491[0...15]
• r9492[0...15]
• p9493[0...15]
Drive converter cabinet units
Operating Instructions, 07/07, A5E00288214A
Interconnection of digital signals (example)
Connection of OFF3 to several drives (example)
Number of BICO interconnections to other drives
BI/CI of BICO interconnections to other drives
BO/CO of BICO interconnections to other drives
Reset BICO interconnections to other drives
6.3 Basic information about the drive system
Operation
185