Siemens SINAMICS S150 Operating Instructions Manual page 130

Converter cabinet units 75 kw to 1200 kw

Hide thumbs Also See for SINAMICS S150:

Table of Contents

Commissioning

5.3 Procedure for commissioning via STARTER

Check your options carefully against the options specified on the type plate.

Internal interconnections are established by the Wizard on the basis of the options selected,

which means that you cannot change the selected options with < Back.

If you made an incorrect entry, delete the complete drive unit from the project navigator and

create a new one.

7. Check your options carefully and then click Continue >

Drive converter cabinet units

Operating Instructions, 07/07, A5E00288214A