Commissioning
5.5 First commissioning
5.5
First commissioning
5.5.1
First commissioning
Start screen
When the system is switched on for the first time, the Control Unit (CU320) is initialized
automatically. The following screen is displayed:
Figure 5-36
When the system boots up, the parameter descriptions are loaded into the operating field
from the CompactFlash card.
Figure 5-37
Selecting the language
When the system is first booted up, a screen for selecting the language appears.
Once the language has been selected, the booting up process continues.
158
Initial screen
0%
50%
Load the parameter descriptions while booting up the system
100%
You can select the language in the dialog
screen.
To change the language, choose <F2> or
<F3>.
To select the language, choose <F5>.
Drive converter cabinet units
Operating Instructions, 07/07, A5E00288214A