Siemens SINAMICS S150 Operating Instructions Manual page 242

Operation
6.8 PROFINET IO
In the following interactive screen enter a freely selectable device name and the IP address
and subnet mask.
The subnet screens must match before STARTER can be run.
Figure 6-39
After selecting the "Assign name" button, the following confirmation will appear if the
assignment was successful.
Figure 6-40
After selecting the "Assign IP configuration" button, the following confirmation will appear if
the assignment was successful.
242
STARTER - Edit Ethernet nodes
STARTER - Successful assignment of the device name
Drive converter cabinet units
Operating Instructions, 07/07, A5E00288214A