Siemens SINAMICS S150 Operating Instructions Manual page 145

Figure 5-26
32. In the Name field, enter a name of your choice.
33. Click the Select standard encoder from list radio button and select one of the available
encoders.
● Standard encoders with code numbers 1xxx can be selected when encoder module
● Standard encoders with code numbers 2xxx can be selected when encoder module
● Standard encoders with code numbers 3xxx can be selected when encoder module
Drive converter cabinet units
Operating Instructions, 07/07, A5E00288214A
Entering the encoder data (option K50)
SMC10 is fitted (option K46).
SMC20 is fitted (option K48).
SMC30 is fitted (option K50).
5.3 Procedure for commissioning via STARTER
Commissioning
145