Language/Sprache/Langue/Idioma/Lingua; Operation Via The Operator Panel (Local Mode) - Siemens SINAMICS S150 Operating Instructions Manual

Operation
6.7 Control via the operator panel
Keyboard test
In this screen, you can check that the keys are functioning properly. Keys that you press are
represented on a symbolic keyboard on the display. You can press the keys in any order you
wish. You cannot exit the screen (F4 – "back") until you have pressed each key at least
once.
Note
You can also exit the key test screen by pressing any key and keeping it pressed.
LED test
In this screen, you can check that the 4 LEDs are functioning properly.
6.7.6

Language/Sprache/Langue/Idioma/Lingua

The operator panel downloads the texts for the different languages from the drive.
You can change the language of the operator panel via the
"Language/Sprache/Langue/Idioma/Lingua" menu.
Note
Additional languages for the display
Languages in addition to the current available languages in the display are available on
request.
6.7.7

Operation via the operator panel (LOCAL mode)

You activate the control keys by switching to LOCAL mode. If the green LED in the
LOCAL/REMOTE key does not light up, the key is not active.
Note
If the "OFF in REMOTE" function is activated, the LED in the LOCAL-REMOTE key flashes.
For LOCAL master control, all of the supplementary setpoints are de-activated.
After the master control has been transferred to the operator panel, the BICO
interconnections at bit 0 to bit 10 of the control word of the sequence control are not effective
(refer to function diagram 2501).
230
Drive converter cabinet units
Operating Instructions, 07/07, A5E00288214A