Siemens SINAMICS S150 Operating Instructions Manual page 225

Display settings
In this menu, you set the lighting, brightness, and contrast for the display.
Defining the operation screen
In this menu, you can switch between five operation screens. You can set the parameters
that are to be displayed.
Figure 6-29 Defining the operation screen
The following image shows how the entries are assigned to the screen positions:
Figure 6-30
The following tables list some of the main signals for the operation screen along with the
associated reference variables and default settings for fast commissioning.
Drive converter cabinet units
Operating Instructions, 07/07, A5E00288214A
Layout of the entries in the operation screen
6.7 Control via the operator panel
Operation
225