Siemens SINAMICS S150 Operating Instructions Manual page 128

Commissioning
5.3 Procedure for commissioning via STARTER
Configuring the drive unit
Figure 5-13
3. Under Voltage selection, choose the correct voltage. Under Cooling type choose the
correct cooling type for your drive unit.
Note
In this step, you make a preliminary selection of the cabinet units. You do not define the
supply voltage yet.
4. A list is now displayed under Drive unit selection. Choose the corresponding drive unit
according to type (order no.) (see type plate).
5. Click Continue >.
128
Configuring the drive unit
Drive converter cabinet units
Operating Instructions, 07/07, A5E00288214A