Siemens SINAMICS S150 Operating Instructions Manual page 119

Accessing the STARTER project Wizard
Figure 5-2 Main screen of the STARTER parameterization and commissioning tool
1. Close the "STARTER Getting Started Drive Commissioning" screen by choosing HTML
Help > Close.
Note
When you deactivate the Display Wizard during start checkbox, the project Wizard is no
longer displayed the next time you start STARTER.
You can call up the project Wizard by choosing Projec > New with Wizard.
To deactivate the online help for Getting Started, follow the instructions provided in Help.
You can call up the online help at any time by choosing Help > Getting Started.
STARTER features a detailed online help function.
Drive converter cabinet units
Operating Instructions, 07/07, A5E00288214A
5.3 Procedure for commissioning via STARTER
Commissioning
119