Siemens SINAMICS S150 Operating Instructions Manual page 165

Converter cabinet units 75 kw to 1200 kw

Hide thumbs Also See for SINAMICS S150:

Table of Contents

Once the encoder has been commissioned, the supply voltage (5/24 V) set for the encoder

is activated on the SMC30 module. If a 5 V encoder is connected and the supply voltage

has not been set correctly via p0404 (bit 20 = "Yes", bit 21 = "No"), the encoder may be

Drive converter cabinet units

Operating Instructions, 07/07, A5E00288214A

Commissioning

5.5 First commissioning