Transportation And Storage - Siemens SINAMICS S150 Operating Instructions Manual

Mechanical installation

3.2 Transportation and storage

3.2 Transportation and storage
Transportation
The following must be taken into account when the devices are transported:
• The devices are heavy. Their center of gravity is displaced and they can be top heavy.
• Suitable hoisting gear operated by trained personnel is essential due to the weight of the
• The devices must only be transported in the upright position indicated. The devices
• Serious injury or even death and substantial material damage can occur if the devices
Note
Information about shipping
• The devices are packaged by the manufacturer in accordance with the climatic conditions
• The notes on the packaging for transportation, storage, and proper handling must be
• For transportation using forklifts, the devices must be set down on a wooden pallet.
• When the devices are unpacked, they can be transported using the optional transport
• Permissible ambient temperatures:
Note
Notes regarding built-in line-side components
If built-in system-side components are to be installed on doors or side panels, you must take
the following points into account:
• The degree of protection (IP20, IP21, IP23, IP43, IP54) must not be reduced as a result.
• The electromagnetic compatibility of the cabinet unit must not be adversely affected.
• When control elements are installed on side or rear panels, these panels must be
30
WARNING
devices.
must not be transported upside down or horizontally.
are not lifted or transported properly.
and stress encountered during transit and in the recipient country.
observed.
eyebolts (option M90) or rails on the cabinet unit. The load must be distributed evenly.
Heavy blows or impacts must be avoided during transit and when the devices are being
set down, for example.
Ventilation: -25°C to +70°C, class 2K3 to IEC 60 721-3-2
Down to -40°C for max. 24 hours
grounded separately.
Drive converter cabinet units
Operating Instructions, 07/07, A5E00288214A