Pcdu - Ricoh SP 8400DN Field Service Manual

PCDU

•
To prevent damage from toner spillage during the PCDU removal, be sure to place a ground cloth on
the floor.
•
To prevent damage from excess light, wrap the OPC drum with protective paper and store the OPC
drum in a cool dark place.
•
Do not touch the OPC drum, cleaning blade, or any seals or tapes.
•
Do not use any alcohols or solvents to clean the OPC drum; Be sure to wipe with a dry cloth. If
excess dirt exists, first wipe with a damp cloth, and next wipe off completely with a dry cloth.
•
Do not rotate the OPC drum clockwise after the PCDU has been installed.
PCDU
•
If you install a complete new PCDU, you do not need to perform SP 3-701. This is because the
machine detects a new unit automatically when you cycle the main power off/on, and performs the
initial adjustment automatically.
1. Open the front cover.
2.
Open the right cover.
3.
Tilt the transfer unit [A].
PCDU
319