Ricoh SP 8400DN Field Service Manual page 680

Ricoh a3 size black and white laser printer.

Hide thumbs Also See for SP 8400DN:

Table of Contents

Card Save Function

The Card Save function is used to save print jobs received by the printer on an SD card with no print

output. Card Save mode is toggled using printer Bit Switch #1 bit number 4. Card Save will remain

enabled until the SD card becomes full, or until all file names have been used.

Captures are stored on the SD card in the folder /prt/cardsave. File names are assigned sequentially from

PRT00000.prn to PRT99999.prn. An additional file PRT.CTL will be created. This file contains a list of all

files created on the card by the card save function.

Previously stored files on the SD card can be overwritten or left intact. Card Save SD has "Add" and

"New" menu items.

Card Save (Add): Appends files to the SD Card. Does not overwrite existing files. If the card

becomes full or if all file names are used, an error will be displayed on the operation panel.

Subsequent jobs will not be stored.

Card Save (New): Overwrites files in the card's /prt/cardsave directory.

Card Save cannot be used with PJL Status Readback commands. PJL Status Readbacks will not work. In

addition they will cause the Card Save to fail.

Turn OFF the main power.

Insert the SD card into slot 2 (lower), then turn ON the main power.

Enter SP mode.

Select the "Printer SP".

Select SP-1001 "Bit Switch".

Chapters

Table of Contents