Table of Contents
Advertisement
help
Displays information about system and emulation features during an
emulation session.
Typing help or ? displays softkey labels that list the options on which you
may receive help. When you select an option, the system will list the
information to the screen.
The help command is not displayed on the softkeys. You must enter it into
the keyboard. You may use a question mark in place of help to access the
help information.
The parameters are as follows:
<HELP_FILE>
This represents one of the available options on the softkey labels. You can
either press a softkey representing the help file, or type in the help file name.
If you are typing in the help file name, make sure you use the complete
syntax. Not all of the softkey labels reflect the complete file name.
Examples
help system_commands
? run
This is a summary of the commands that appear on the softkey labels when
you type help or press ?:
system_commands
run
trace
step
break
display
modify
load
store
copy
reset
Emulator/Analyzer Interface Commands
help
385
Advertisement
Table of Contents
