HP 64782 User Manual page 183

Using the Emulator
To set the display modes
Source/Symbols View
Source in Memory specifies whether source lines are included, mixed with
assembly code, or excluded from mnemonic memory displays.
Source in Trace specifies whether source lines are included, mixed with
stored states, or excluded from trace displays.
Symbolic Addresses specifies whether symbols are included in displays.
Tab Expansion sets the number of spaces displayed for tabs in source lines.
Source/Symbols View
Label Field sets the width (in characters) of the address field in the trace list
or label (symbols) field in any of the other displays.
Mnemonic Field sets the width (in characters) of the mnemonic field in
memory mnemonic, trace list, and register step mnemonic displays. It also
changes the width of the status field in the trace list.
Symbols in Mnemonic Field sets the maximum width of symbols in the
mnemonic field of the trace list, memory mnemonic, and register step
mnemonic displays.
Source Lines sets the width (in characters) of the source lines in the memory
mnemonic display.
Auto Update
Memory Displays (Except Mnemonic) toggles whether memory displays are
automatically updated after commands that change memory contents or
whether you must enter memory display commands to update the display.
You may wish to turn off memory display updates, for example, when
displaying memory mapped I/O.
Memory Mnemonic Auto PC toggles whether memory mnemonic displays
automatically jump to the new PC location when the PC changes (such as
during stepping or break). You may wish to turn off the automatic update of
memory mnemonic displays when you want to examine a specific area of
memory regardless of the location of the current PC (such as during
stepping).
Trace Displays toggles whether trace displays are automatically updated
when trace measurements complete or whether you must enter trace display
commands to update the display. You may wish to turn off trace display
updates in one emulator/analyzer window in order to compare the display
with a new trace display in another emulator/analyzer window.
182