HP 64782 User Manual page 328

For the graphical user interface
Hide thumbs Also See for 64782:
Table of Contents

Advertisement

Edit the line containing "HP64_Softkey.lines" so that it is uncommented and
is set to the new value:
!------------------------------------------------------------------------------
! The lines and columns set the vertical and horizontal dimensions of the
! main display area in characters, respectively.
! and 80 columns.
These minimums are silently enforced.
!
! Note: The application cannot be resized by using the window manager.
HP64_Softkey.lines:
!HP64_Softkey.columns:
Save your changes and exit the editor.
If the RESOURCE_MANAGER property exists (as is the case with
3
HP VUE — if you're not sure, you can check by entering the xrdb
-query command), use the xrdb command to add the resources to
the RESOURCE_MANAGER property. For example:
xrdb -merge -nocpp HP64_Softkey.tmp
Otherwise, if the RESOURCE_MANAGER property does not exist, append
the temporary file to your $HOME/.Xdefaults file. For example:
cat HP64_Softkey.tmp >> $HOME/.Xdefaults
Remove the temporary file.
4
Start or restart the Graphical User Interface.
5
After you have completed the above steps, you must either start, or restart
by exiting and starting again, the Graphical User Interface. Starting and
exiting the Graphical User Interface is described in the "Starting and Exiting
HP 64700 Interfaces" chapter.
36
85
To modify the Graphical User Interface resources
Minimum values are 18 lines
Setting X Resources
327

Advertisement

Table of Contents
loading

Table of Contents