Table of Contents
Advertisement
Controls the display format for the data, memory, register, software
breakpoint, and trace displays.With the set command, you can adjust the
display format results for various measurements, making them easier to read
and interpret. Formatting of source lines, symbol display selection and
width, and update after measurement can be defined to your needs.
The display command uses the set command specifications to format
measurement results for the display window. Another option to the set
command, <ENV_VAR> = <VALUE>, allows you to set and export system
variables to the UNIX environment.
The default display format parameters are the same as those set by the
commands:
set update
set source off symbols off
You can return the display format to this state by entering:
set default
The parameters are as follows:
default
This option restores all the set options to their default settings.
<ENV_VAR>
Specifies the name of a UNIX environment variable to be set.
=
The equals sign is used to equate the <ENV_VAR> parameter to a particular
value represented by <VALUE>.
inverse video
This displays source lines in normal video.
off
This highlights the source lines on the screen (dark characters on light
on
background) to differentiate the source lines from other data on the screen.
Emulator/Analyzer Interface Commands
set
415
Advertisement
Table of Contents
