To Display Memory Repetitively; To Modify Memory - HP 64782 User Manual

To display memory repetitively

•
Choose Display→Memory→Repetitively.
•
Using the command line, enter the display memory repetitively
command.
The memory display is constantly updated. The format is specified by the
last memory display command.
This command is ignored if the last memory display command was a
mnemonic display.

To modify memory

•
Choose Modify→Memory and complete the command using the
command line.
•
To modify memory at a particular address, place an absolute or
symbolic address in the entry buffer; then, choose
Modify→Memory at () and complete the command using the
command line.
•
Using the command line, enter the modify memory command.
You can modify the contents of one memory location or a range of memory
locations. Options allow you to modify memory in byte, short, word, and real
number formats.
Using the Emulator
To display memory repetitively
177