Table of Contents
Advertisement
Example
Suppose you have discovered that the logical name for a 6833x emulator
connected to the LAN is "em6833x". To start the Graphical User Interface
and begin communicating with that emulator, enter (assuming your $PATH
includes $HP64000/bin)
emul700 em6833x
After a few seconds, the Graphical User Interface Emulator/Analyzer window
should appear on your screen. The window will be similar to the following:
Step 3. Exit the Graphical User Interface
Position the mouse pointer over the pulldown menu named "File" on
1
the menu bar at the top of the interface screen.
Press and hold the command select mouse button until the File menu
2
appears.
While continuing to hold the mouse button down, move the mouse
3
pointer down the menu to the "Exit" menu item.
Display the Exit cascade menu by moving the mouse pointer to the
4
right edge of the Exit menu choice. There is an arrow on the right
edge of the menu item.
Choose "Released" from the cascade menu.
5
The interface will terminate and release the emulator for use by others.
Step 3. Exit the Graphical User Interface
Installation
525
Advertisement
Table of Contents
