Using System Commands; To Set Unix Environment Variables; To Display The Name Of The Emulation Module - HP 64782 User Manual

Using System Commands

With the Softkey Interface system commands, you can:
•
Set UNIX environment variables while in the Softkey Interface.
•
Display the name of the emulation module.
•
Display the event log.
•
Display the error log.

To set UNIX environment variables

•
Using the command line, enter the set <VAR> command.
You can set UNIX shell environment variables from within the Softkey
Interface with the set <environment_variable> = <value> command.
Examples To set the PRINTER environment variable to "lp -s":
set PRINTER = "lp -s"
After you set an environment variable from within the Softkey Interface, you
can verify the value of it by entering !set.

To display the name of the emulation module

•
Using the command line, type the name_of_module command.
While operating your emulator, you can verify the name of the emulation
module. This is also the logical name of the emulator in the emulator device
file.
183